How to clean and restore rubber floor mats

BREAK OUT THE HEAVY-DUTY CLEANERS

Just like they withstand heavy salts and soils, rubber floor mats also stand up to heavy duty cleaning solutions, so go ahead and pull out the heavy hitters to make your job easier. They are rubber after all, so you can safely use a tyre and wheel cleaner or a highly concentrated car wash soap.

We recommend All Wheel & Tyre Cleaner or M.A.X. Power Car Wash. The high alkalinity in cleaners like these, paired with a good wheel brush, will make short work of oils, greasy stains, salt buildup, mud and more.

RESTORE AND PROTECT

While a rubber mat is tough enough to stand up to the rigours of extreme use, the material can fade over time or even dry and crack from UV exposure.

That’s why we recommend a very light application of protectant at least every time you deep clean your mats. An interior detailer spray, like Dash & Glass, works great for this purpose.

CLEANING AND RESTORING FLEXIBLE RUBBER MATS

1. Clean the exterior surface where you plan to work. A concrete driveway or sidewalk is ideal. Hose down the area to remove any loose soils and then remove your rubber mats from the car and place them on your clean work area.


2. Spray the mats with a powerful stream of water to break up and rinse away as much soil as possible.


3. Spray with wheel cleaner or a powerful car wash soap solution. Allow the cleaner to dwell for a few moments but don’t let the spray dry on the mats.


4. Scrub each mat with a soft bristle brush. Be sure to get into all the nooks and crannies. You may need to brush from a number of angles to reach every surface.


5. Rinse the mats with water and check your work. If you still find soil, spray them with more cleaning solution and scrub again. Rinse very well, ensuring there is no cleaner residue left behind. Allow to dry.


6. Check the backs of the mats. If they’re soiled, too, simply follow the steps above to clean, rinse and dry them.


7. Once you’ve deep cleaned your mats, we recommend restoring and protecting them. Simply mist a microfiber cloth with a light protectant. For this job, we like to use interior detailers, cleaning products with integrated, light-duty protectants. Wipe the cloth over all surfaces, pushing it into any ribs or textures of the mat. The colour of the mat should appear deeper and richer, like when it was new, but the surface should not appear shiny. Flip the microfiber cloth to a clean, dry side and wipe away any extra protectant.

Pro Tip: After applying protectant, always check the safety of your floor mats. Simply return each mat to the floorboard, sit in the car and place your feet on the mat. Try to slide your feet back and forth. If your shoes slide over the rubber, wipe the mats again with a microfiber towel to remove any residual slickness. Your mats are safe when you feel your shoes gripping, not sliding, on the rubber.

CLEANING HARDER, LESS FLEXIBLE FLOOR MATS

Certain companies make all-weather floor mats from materials other than rubber. Typically, they are harder, less flexible and require a different care process. Some are even cut to fit each car model. To clean these harder mats, just follow a few simple instructions:

These harder mats don’t typically require any restoration. Once they’re clean and dry, they’re all set to go back into the car!